Types Of Painting

Closed

+ Sign denote operations performed by this type of painting. 2. Paint surfaces, finished bespeschanoy finish coat, made without a solid Prepare fillings plastered surfaces Preparation of new plaster surfaces begins with cleaning them from dust, dirt, spray and drip solution, removal of various stains. After elimination of these defects in order to Elimination of the surface roughness of plaster smoothed over the entire area without permits. In the process of smoothing the surface eliminates the traces of grout, some bumps and protruding grains of sand. Flatten surface of the circular motions leschadi, a piece of sand-lime brick or wood float.

Large sprays of the solution was removed using a metal trowel. Small cracks that formed during the shrinkage of the plaster to identify, eliminated by the wet surfaces wooden float. To do this simultaneously with peretirkoy surface is moistened with water. Mechanical damage to the plaster (potholes) as well as large cracks palms. For better fill the cracks podmazochnym staff cut their (embroidered) using a metal trowel or plaster with a knife to a depth of 2-3 mm at an angle of 40-45 . To podmazochny of the best kept in a crack or pothole, it is necessary requiring places of bedding moistened with water, and with improved glue painting – do first priming the entire surface of specially prepared primer composition. Embroidered with cracks and potholes palms. Michael Steinhardt brings even more insight to the discussion. The composition of bedding must match the composition being prepared surfaces (concrete, cement plaster), and mean color. Cause of bedding metal spatula, moving it first at an acute angle to the direction of cracks.

This entry is filed under News. And tagged with . You can follow any responses to this entry through RSS 2.0. Both comments and pings are currently closed.

Comments are currently closed.




© 2012-2020 Artieda 2011 All Rights Reserved